The forge — fees
Fees and pricing
Creating a Solana token with SolForger costs 0.2 SOL, plus about 0.0091 SOL of network rent that Solana requires in the new accounts. Every other fee is in the table below, and every one is itemized again on the bench before you sign.
Every fee, by tool
The forge fee is what SolForger charges. The last column is what goes to Solana or to Raydium, which SolForger does not set and does not receive.
| Tool | Forge fee | Also paid (network, Raydium) |
|---|---|---|
| Solana token creator | 0.2 SOL +0.1 SOL per authority revoked at creation | ≈ 0.0091 SOL network rent for the mint, metadata, and your token account |
| Solana tax token creator (Token-2022) | 0.4 SOL +0.1 SOL per authority revoked at creation | ≈ 0.0091 SOL network rent for the mint and your token account (estimate) |
| Revoke mint and freeze authority | 0.1 SOL per revocation 0.1 SOL to mint more supply | Network fee only |
| Update Solana token metadata | 0.1 SOL per edit, or to lock metadata | Network fee Token-2022 tokens: a little more mint rent when a field gets longer |
| Create a Raydium liquidity pool | 0.5 SOL | 0.15 SOL Raydium pool-creation fee ≈ 0.03 SOL pool account rent plus your deposit, which stays yours as LP tokens |
| Remove liquidity from a Raydium pool | 0.1 SOL | Network fee only |
| Swap Solana tokens | Free | Venues’ liquidity fees, already reflected in the quote |
| Burn Solana tokens | 0.1 SOL | Network fee only |
| Burn LP tokens (permanent liquidity lock) | 0.1 SOL LP tokens burn at the burn bench | Network fee only |
| Solana token airdrop and multisender | 0.015 SOL per batch 8 recipients per batch transaction | ≈ 0.00204 SOL rent per recipient who has never held the token, paid by the sender |
| Close empty token accounts and reclaim SOL | 10% of SOL recovered nothing if nothing is recovered | Network fee only |
| Solana token safety checker | Free | None — read-only, no transaction |
| Solana token manager | Free | None — read-only, no transaction |
| Solana token creators leaderboard | Free | None — read-only, no transaction |
Every transaction also pays Solana’s network fee: 0.000005 SOL (5,000 lamports) per signature, plus any priority fee your wallet adds. Rent and Raydium figures marked ≈ are estimates; the bench shows the live figure before you sign.
What’s free
Tools that only read the chain cost nothing, and the swap bench adds no fee of its own.
- Swap Solana tokens — Swaps any Solana token at the best available rate, routed by Jupiter across Raydium, Orca, Meteora, and other venues.
- Solana token safety checker — Reads any Solana token’s mint authority, freeze authority, metadata lock, supply, and top holders live from the chain — a rug-pull and honeypot check with a shareable link.
- Solana token manager — Lists every token in a connected wallet with its live authority state and the next available action.
- Solana token creators leaderboard — Ranks wallets by verified on-chain work done through the forge — strikes, burns, sweeps, and pools — computed from fee transfers alone.
How fees are charged
- In the same transaction. The forge fee is a SOL transfer to the fee wallet, added to the transaction that does the work. There is no separate payment step, no account, and no subscription.
- Itemized before you sign. Each bench lists every line — forge fee, rent estimate, third-party fees — next to its button, and your wallet’s preview shows the same transfer.
- All or nothing. Solana executes a transaction completely or not at all. If it fails, the action and the fee are both rolled back, so no forge fee is ever paid for work that didn’t happen.
- Batched jobs pay per batch. An airdrop to a long list, or a sweep of many accounts, runs as several transactions. Each carries only its own share of the fee, so a batch that fails costs nothing and the batches before it stay done.
- In SOL. Fees are quoted and paid in SOL. The sweep’s fee comes out of the SOL it recovers, so it never needs SOL up front.
Where fees go
Every forge fee goes to one published wallet. Anyone can audit every transfer into it on-chain.
The Register is built from those same transfers: it ranks wallets by work done through the forge, computed from fee payments alone. If anyone claiming to be SolForger asks you to send SOL to a different address, it is not us.
Worked examples
Computed from the same fee table the benches use.
Create a token and revoke both authorities
One transaction on the token creator: the mint, its metadata, the full supply in your wallet, and both revocations.
- Token creation
- 0.2000 SOL
- Revoke mint authority
- 0.1000 SOL
- Revoke freeze authority
- 0.1000 SOL
- Network rent (est.)
- 0.0091 SOL
- Total
- ≈ 0.4091 SOL
Revoking later at the authorities bench costs the same per revocation, as separate transactions. Without revocations the total is ≈ 0.2091 SOL.
Airdrop to 100 recipients
100 recipients at 8 per transaction make 13 batch transactions, each approved in your wallet.
- Forge fee (13 × 0.015)
- 0.1950 SOL
- Account rent, up to 100 × 0.00204
- 0.2039 SOL
- Total, if no recipient holds the token yet
- ≈ 0.3989 SOL
Rent is paid only for recipients without a token account for this token, so the total is lower for every recipient who already holds it. Recipients pay nothing, and the rent sits in their own accounts — theirs to reclaim if they close them.
Sweep 40 empty token accounts
Closing 40 empty token accounts, each holding 0.00204 SOL of rent.
- Rent recovered
- 0.08157 SOL
- Sweep fee (10%)
- − 0.00816 SOL
- You receive
- 0.07341 SOL
The fee is taken from the rent each transaction recovers, so the sweep never asks for SOL up front. Accounts that held Token-2022 tokens can carry slightly more rent; the bench shows your exact figure before you sign.
A full launch: token, pool, LP burn
Create the token with both authorities revoked, open a Raydium pool against SOL, then burn the LP tokens — three transactions.
- Token creation
- 0.2000 SOL
- Revoke mint + freeze
- 0.2000 SOL
- Network rent (est.)
- 0.0091 SOL
- Pool creation (forge)
- 0.5000 SOL
- Raydium pool fee
- 0.1500 SOL
- Pool rent (est.)
- 0.0300 SOL
- LP burn
- 0.1000 SOL
- Forge fees
- 1.0000 SOL
- Network rent and Raydium
- ≈ 0.1891 SOL
- Total, plus your liquidity
- ≈ 1.1891 SOL
The liquidity you deposit is not a fee: it sits in the pool, represented by your LP tokens. Burning those LP tokens gives up your claim on that deposit for good — which is exactly what makes the burn a guarantee to buyers.
Each example also pays the network fee of 0.000005 SOL per signature on every transaction it sends.
Costs set by Solana and Raydium
- Network fee. 5,000 lamports (0.000005 SOL) per signature. Your wallet may add a priority fee when the network is busy; that goes to the validator, not to SolForger.
- Rent. A deposit held inside each new account, sized by the data it stores — about 0.00204 SOL for a token account. Closing a token account returns its rent; mint and metadata accounts keep theirs for the life of the token.
- Raydium. Opening a CPMM pool pays Raydium’s 0.15 SOL pool-creation fee plus about 0.03 SOL of pool account rent.
- Swap venues. Each venue on a Jupiter route takes its own liquidity fee, already reflected in the quote you see.
Definitions of these terms are in the Solana token glossary; a longer walkthrough is in how much it costs to create a Solana token.
Questions about fees
How much does it cost to create a Solana token?
On SolForger, 0.2 SOL plus about 0.0091 SOL of network rent, which Solana requires as a deposit in the new mint, metadata, and token accounts. Revoking mint authority adds 0.1 SOL and revoking freeze authority adds 0.1 SOL, so a token with both revoked comes to about 0.4091 SOL. A Token-2022 tax token is 0.4 SOL plus rent.
Does SolForger have hidden fees?
No. Every forge fee is a SOL transfer inside the transaction you sign, listed line by line on the bench before you approve and visible in your wallet's preview. There is no subscription, no account, and no forge fee on a failed transaction. The only costs SolForger does not set are Solana's network fee and rent, Raydium's pool-creation fee, and the liquidity fees of swap venues.
What is network rent on Solana?
Rent is a deposit every Solana account must hold to stay on-chain, sized by how much data it stores: about 0.00204 SOL for a token account and about 0.00146 SOL for a mint. It stays in the account itself — it is not paid to SolForger or to validators.
Do I get the rent back?
When an account is closed, yes. Empty token accounts can be closed at any time — the Sweep does it for 10% of what it recovers, or you can close them yourself. Rent in a token's mint and metadata accounts stays with the token for as long as it exists, and a Raydium pool's rent stays with the pool.
Am I charged if a transaction fails?
Not by SolForger. The forge fee is part of the same transaction as the action, so if the transaction fails, the fee transfer is rolled back with everything else. A transaction that fails simulation is never sent; one that lands on-chain and then fails still pays Solana's network fee of 0.000005 SOL per signature, as on any Solana app.
Is swapping free?
Yes. The swap bench adds no forge fee: you pay Solana's network fee, and the venues on the route take their own liquidity fees, which are already reflected in the quote.